Lukas
Articles
-
How to Pair Your LED Lights and Heater
This guide will help you easily pair your Pergolux LED lights and/or infrared heaters to your pergola's controller. Please follow the relevant section(s) below. We have included helpful videos to ...
-
The LED's are very dim
If you have installed your LED strips and the light is dim, it is possible that they have been installed backwards. The front of the LEDs should be smooth, with the rigged side being installed into...
-
Pergolux App Troubleshooting Guide
If you're having trouble discovering the PERGOLUX Controller, follow these steps to resolve the issue: Forget the Device:First, go to your phone’s Bluetooth settings and forget or delete the PERGOL...
-
Pergolux App Features
Roof Control:With the PERGOLUX app, you have full control over the pergola's roof. You can adjust the roof from 0% to 100% (100% means fully open). To fully close the roof, simply toggle the roof c...
-
How to setup the Pergolux App
Before starting the connection process, please ensure that Bluetooth is enabled on your smartphone, and that you're within range of the PERGOLUX Controller. Download the App:The PERGOLUX app is a...
-
Remote control layout
Below you can find information on how to use your Pergolux Series 3 remote control. Control Buttons:Up Button: Controls the "up" movement. (e.g. increasing the LED brightness)Stop Button: Stops the...
-
Range of the Series 3 remote controller
The signal of our PERGOLUX Series 3 remote control extends up to 40 meters in an open space. This means that both the pergola and the accessories can be controlled from a greater distance than ever...
-
Operating the LEDs using the S3 remote control
Below is a guide on how to use your Pergolux LEDs with the S3 remote control. Turning the LED Strips on:Press the “UP” arrow on the remote control, the LED Strips will turn on.Turning the LED Strip...
-
Operating the heater using the S3 remote control
The first step is to change the channel on the remote controller to the heater (Usually this will be paired to channel 3). To do this, press the left/right arrows until channel 3 at the top of the ...
-
S3 - Motor Direction Change
When using the Pergolux remote controller the 'UP' button will close the louvres and the 'DOWN' button will open the louvres. However, if you would like to change this, you can do so. To change the...