Below you can find information on how to use your Pergolux Series 3 remote control.
Control Buttons:
Up Button: Controls the "up" movement. (e.g. increasing the LED brightness)
Stop Button: Stops the current action.
Down Button: Controls the "down" movement. (e.g. decreasing the LED brightness)
Setting Buttons:
S1: Used to set limits, delete single channel programming, delete all programming, etc.
S2: Used for network configuration, motor power-on, and programming.
Choose Channel:
Right Channel: Increases the channel.
Left Channel: Decreases the channel.
Low Voltage Prompt:
When the remote control is at less than 20% of its total power (3.65V), the brightness of the LED display will dim.