Lukas
Articles
-
Controlling the RGB LED Strips with the S3 Remote Control
This guide explains how to operate your LED strips using the remote control and the PERGOLUX app. Turning the LED Strips On and Off• Turn On: Press the UP arrow on the remote control.• Turn Off: Pr...
-
Controlling the Warmwhite LED Strip with Remote Control S3
Turning the LED strip on and off:When the LED strip is off, press the “UP” arrow or the “Down” arrow to turn on the LED strip.When the LED strip is on, press the “Stop” button to turn off the LED s...
-
Controlling the Heater with Remote Control S3
Turning the heater on:Press the “UP” arrow on the remote control. The LED indicator on the Control Box will flash once, indicating that the heater is turned on. This activates the desired warmth. T...
-
S3 - Change the Direction of the Motor While its Running
To change the motor direction (‘UP’ to close slats and ‘DOWN’ to open slats), press and hold the ‘STOP’ button on the remote control for 7 seconds while on the channel that controls the motor. The ...
-
S3 - Delete a Single Channel’s Programming on the Control Box
Press and hold the programming button on the control box for the single channel you want to delete (about 15 seconds) until the corresponding LED indicator flashes quickly 3 times.The single channe...
-
Installation Precautions
Power to the Control Box must be cut off before connecting accessories.Accessories should be firmly tightened by hand to the Control Box to avoid a loose connection.After installation, ensure that ...
-
How to unpair the remote control from the control box
You can unpair the remote control by:Press and hold the blue light button on the control box for approximately 15 seconds. During this time, the lights on the control box will flash. Continue holdi...
-
I want to fully close my pergola at once – is that possible?
Yes, it is! You can fully close your pergola by selecting the programmed motor channel on the remote. Then, press the up and down arrows on the remote simultaneously. The motor will then retract co...
-
My remote isn’t working?
If your remote isn't working, please follow these steps:Charge the remote: Check if a red blinking light appears in the number row of the remote. This indicates that the remote is charging. Check t...
-
I have multiple S3 control boxes. Can I program them all to one remote?
Yes, you can!You can connect up to 6 control boxes with a single remote. This allows you to control a maximum of 6 pergolas simultaneously within a range of up to 40 meters from the remote.Please n...