This guide explains how to operate your LED strips using the remote control and the PERGOLUX app.
Turning the LED Strips On and Off
• Turn On: Press the UP arrow on the remote control.
• Turn Off: Press the Down arrow on the remote control.
Changing the Colour
• When the LED strips are on, press the Stop button on the remote control to cycle to the next colour.
• Refer to the LED strips colour table for available colours.
Adjusting Brightness
Continuous Brightness Adjustment
Increase Brightness:
Press and hold the UP arrow for about 1.5 seconds. The brightness will increase continuously until it reaches the maximum level.
To stop and save the brightness at any point, press any of the Up, Down, or Stop buttons.
Decrease Brightness:
Press and hold the Down arrow for about 1.5 seconds. The brightness will decrease continuously until it reaches the minimum level.
To stop and save the brightness at any point, press any of the Up, Down, or Stop buttons.
Step-by-Step Brightness Adjustment
- Increase by One Level: Press Up + Stop simultaneously.
- Decrease by One Level: Press Down + Stop simultaneously.
Additional Information
- The factory default colour is white.
- There are 21 brightness levels ranging from 0 (darkest) to 20 (brightest).
- The default brightness level is set to level 10.
- The PERGOLUX app allows setting brightness below level 0 of the RF transmitter control.
- If brightness is set below level 0 via the app, it will automatically return to the default level 10 when the control box is turned off and back on again.