Lukas
Articles
-
How do I know if my remote is charging?
Yes, you can monitor the charging progress of your remote control by observing the blinking LED numbers.Depending on the charge level, the remote control starts blinking as it charges. Once the rem...
-
The back plastic cover of the remote control is bulging
If the back plastic cover of your remote control is swelling, this indicates a battery defect.⚠ Warning: Risk of explosion!Please follow these steps:1. Safety first: Immediately place the remote co...
-
Recommendation for the first battery charge
To ensure the longest possible battery lifespan, we recommend the following procedure for the first charge:- Charge the battery to 100% for the first time.- Make sure to perform the charging proces...
-
How many charging cycles does the battery have?
The lithium-ion battery has 500 charge cycles with normal use and can reach up to 700 charge cycles with optimal usage. This means that even after several years, around 80% of the original battery ...
-
How to charge your S3 remote controller
To charge your remote control properly, you need a suitable power adapter. Please ensure that you meet the following requirements:- A power adapter with an output voltage of 5 volts- A USB-C chargi...
-
Power connection requirements
No special power connections are required for the installation and use of our products, including pergolas and matching accessories. A standard household socket is completely sufficient.Our product...
-
How does the power cord come out in a wall-mounted pergola?
In a standard pergola configuration, the control box is typically installed within the side beams, with the power cord routed through one of the two rear posts (columns). However, in a wall-mounted...
-
Where do I place the power cord and the control box?
In theory, the control box can be placed anywhere. However, it is recommended to position it in an easily accessible location, typically behind a beam cover. These beam covers are located on the si...
-
How do I attach the grounding wire?
The grounding wire provides a safe path for electrical current to flow to the ground in case of a fault, such as a short circuit or equipment malfunction. It is essential for protecting both people...
-
The brush strips are missing
The brush strips are packaged with green paper inside the “W” beam. Even if the frame is already assembled, you can still check for them. Simply unscrew the side beam where it attaches to the colum...