If you need to access the control box after installation, you will need to remove the beam cover and the reinstall it. Below is a guide on how to do this alongside some videos.
Removing the beam cover:
- Remove the last louvre (the one above where you have installed the control box): Start by unclicking the last louvre to give yourself more room to work.
- Remove the cover: Lightly place your thumbs underneath the cover from below. Then, pull it diagonally upward with some force.
- Cover removal: The cover should now be loosened and removable.
Reinstalling the beam cover:
- Position the cover: Place the cover with the top in the beam rail at about a 60° angle.
- Clear any cables: Ensure no control box cables are in the way.
- Press the cover down: Now, press it back down onto the beam until you hear a "click" sound. This confirms that the cover is securely attached.
- Reinstall the louvre: Finally, reinstall the louvre, and your work is complete!