To operate your pergola’s electronic features, you will need to pair your remote control with the control unit.
Locate the Buttons: Under the LED and motor cables, you will find four nodes: one blue and three green.
-
Pairing the LEDs:
Using the provided pin, press and hold the first green button for 7 seconds. This is for your LEDs.
The LED should blink, indicating it is in pairing mode.
On the remote, select a channel using the left and right arrows, then press the Up arrow to set it.
If the LED node blinks once and then stays on continuously, the channel has successfully paired.
-
Pairing the Motor and Heater:
Repeat the above process for the second green button (motor) and third green button (heater), assigning each to the desired remote channel.
We provide both a PDF guide: Remote Control Pairing PDF, and a video guide demonstrating the pairing process.