In some cases, you may need to rotate the foot plates of your pergola to make adjustments or change its positioning. This process involves drilling new holes in the foot plates to secure them in the desired orientation. Follow the steps below to ensure that the foot plates of your pergola are rotated safely and correctly.
Step 1: Measure the Distances
Start by measuring the distances between the existing threaded holes on the pergola. These measurements are crucial to ensure the new holes align correctly.
- Mark these distances on the foot plate using a pencil or fine marker.
- Make sure the markings are precise to avoid issues later on.
Step 2: Drill New Holes
- Use a countersink drill bit suitable for metal to drill new holes in the foot plate. A countersink bit ensures that the screws will sit flush with the surface of the foot plate.
- Carefully drill the new holes exactly at the marked spots. Be precise in your work to avoid misalignments that could cause problems.
Step 3: Attach the Foot Plate
- Once the new holes are drilled, you can attach the foot plate to the pergola in the desired orientation.
- Ensure the screws are tightened securely and the plate is firmly attached.
By following these steps, you can safely rotate the foot plates of your pergola and ensure they are properly aligned and secured.