The Pergolux control box acts as the central hub for power, lighting, heating, and motor operation.
The control box includes the following main cables:
AC Load – Used to connect your heater
AC Input – Connects the control box to the main power supply
LED Cable –
Four-pin connector for RGB LEDs
Two-pin connector for Warm White LEDs
Motor Cable – Connects to the motor (Sundream and Skydance models)
You’ll also find a yellow and green striped grounding wire, which is essential for safe installation.
A USB-C cable is included but does not require any action during installation, along with an antenna used to receive the remote-control signal.
Watch the video below for a step-by-step guide on installing your Pergolux control box.