Before installing your LED lights, please refer to the article “How to Remove the Blanking Strip.”
Once this step is complete, you’ll notice the LED strip has two sides: one textured and one smooth and flat. Ensure the smooth, flat side is facing outward when installing it into the beam.
Begin installation at each corner and work your way toward the middle, pressing the LED strip into the blanking strip as you go. Repeat this process on all sides. One corner will include a connection piece that links the LEDs to the control box; all other corners must be connected to allow the system to sync as one continuous unit.
Quick tip: Lightly spraying the track with soapy water before installing the LEDs can make insertion easier and smoother.
Watch the video below for a step-by-step guide on installing the LED lights into your Pergolux pergola.